Array
(
    [_id] => MongoId Object
        (
            [$id] => 5940509d4170e298388b45f6
        )

    [abstract] => Technical Directors can make your head spin trying to explain how we are going to make the lights turn on, change colors and flame throw at the precise moment it’s supposed to, but in truth, most people don’t understand what we are trying to say...so hopefully this helps
    [app_label] => decisionbriefs
    [content] => 

Just what in the heck are those tech guys talking about anyway?

Often times in the running back and forth on event site, you’ll hear a lot of terms and jargon bandied about in hurried discussions in the days, hours and minutes leading up to curtain drop. Technical Directors can make your head spin trying to explain how we are going to make the lights turn on, change colors and flame throw at the precise moment it’s supposed to, but in truth, most people don’t understand what we are trying to say, and what does it all actually mean?! By no means can we cover all of the terms and tools we use on a daily basis, but I can help explain a little bit along the way.

Here are some popular tech terms you will likely hear on site during the course of your show or live experience:

Hotspot
In a projectionist’s world, this is a term used to describe an area on a projection surface that is abnormally brighter than any other spot. This happens when you have a high lumen projector with an ultra-short throw lens doing rear projection in a very dark space. When you look at the screen, you can see exactly where the lens sits on the surface because it appears as a bright spot right in the middle of the screen (if projector is set up properly for rear projection).

DSM
Downstage Monitor – This is the monitor that sits low to the floor facing the presenter for the his or her reference. This helps the presenter look confident when addressing the crowd by facing forward and not having to turn around to see their content. This monitor is sometimes appropriately termed, the Confidence Monitor or Comfort Monitor.

Eye Candy 
Sounds kind of creepy, but this is a generic term for pre-event visuals – graphic animations, thank you sponsor bumpers and other flashy forms of media would fit the “eye candy” criteria.

Ghosting
When a video is interlaced incorrectly on progressive scan outputs, it can have an effect where a duplicate image appears slightly offset, as if there is a shadow behind or next to the object. This is often referred to as ghosting.

Check back in with us for more A/V and tech terms explained weekly or contact us about providing tech support for your next live experience!

 

[content_id] => 10 [created] => 2017-06-13 00:00:00 [file] => [full_permission] => [group_id] => 581232754170e280568b45ff [label] => common-av-terms-explained [leads_form_intro] => [logo] => images/events/featured/5940509d4170e298388b45f6.jpg [media] => Array ( [images] => Array ( [0] => Array ( [filename] => images/enterprise/content/5940509d4170e298388b45f6/IMG_2868-1.jpg [description] => [uploadname] => IMG_2868.jpg ) [1] => Array ( [filename] => images/enterprise/content/5940509d4170e298388b45f6/IMG_4313-1.jpg [description] => [uploadname] => IMG_4313.jpg ) [2] => Array ( [filename] => images/enterprise/content/5940509d4170e298388b45f6/IMG_0095-1.jpg [description] => [uploadname] => IMG_0095.jpg ) [3] => Array ( [filename] => images/enterprise/content/5940509d4170e298388b45f6/DSC_0214-1.jpg [description] => [uploadname] => DSC_0214.jpg ) ) ) [owner] => Array ( [ref] => Array ( [$ref] => groups [$id] => MongoId Object ( [$id] => 581232754170e280568b45ff ) [$db] => enterprise ) [label] => itc-journeys [name] => ITC Journeys ) [permission] => 0 [status] => 2 [title] => Common AV Terms Explained [updated] => 2017-06-14 14: 13: 30 [vocabulary] => Array ( ) [vocabulary_categories] => Array ( [0] => service [1] => product ) [meta] => Array ( [published] => 2017-06-13 00:00:00 ) [source_collection] => content )

Common AV Terms Explained

Just what in the heck are those tech guys talking about anyway?

Often times in the running back and forth on event site, you’ll hear a lot of terms and jargon bandied about in hurried discussions in the days, hours and minutes leading up to curtain drop. Technical Directors can make your head spin trying to explain how we are going to make the lights turn on, change colors and flame throw at the precise moment it’s supposed to, but in truth, most people don’t understand what we are trying to say, and what does it all actually mean?! By no means can we cover all of the terms and tools we use on a daily basis, but I can help explain a little bit along the way.

Here are some popular tech terms you will likely hear on site during the course of your show or live experience:

Hotspot
In a projectionist’s world, this is a term used to describe an area on a projection surface that is abnormally brighter than any other spot. This happens when you have a high lumen projector with an ultra-short throw lens doing rear projection in a very dark space. When you look at the screen, you can see exactly where the lens sits on the surface because it appears as a bright spot right in the middle of the screen (if projector is set up properly for rear projection).

DSM
Downstage Monitor – This is the monitor that sits low to the floor facing the presenter for the his or her reference. This helps the presenter look confident when addressing the crowd by facing forward and not having to turn around to see their content. This monitor is sometimes appropriately termed, the Confidence Monitor or Comfort Monitor.

Eye Candy 
Sounds kind of creepy, but this is a generic term for pre-event visuals – graphic animations, thank you sponsor bumpers and other flashy forms of media would fit the “eye candy” criteria.

Ghosting
When a video is interlaced incorrectly on progressive scan outputs, it can have an effect where a duplicate image appears slightly offset, as if there is a shadow behind or next to the object. This is often referred to as ghosting.

Check back in with us for more A/V and tech terms explained weekly or contact us about providing tech support for your next live experience!

 

ITC Journeys

http://www.itcjourneys.com/

Agencies

523 Hanley Industrial Court
Brendan Lyss

3146461800
blyss@itcjourneys.com

Request info

Common AV Terms Explained
Common AV Terms Explained

Technical Directors can make your head spin trying to explain how we are going to make the lights turn on, change colors and flame throw at the precise moment it’s supposed to, but in truth, most people don’t understand what we are trying to say...so hopefully this helps

Read more

Retrospective: How Brick and Mortar Retailers Laid the Foundation for Experiential
Retrospective: How Brick and Mortar Retailers Laid the Foundation for Experiential

As brands looked to their storefronts to compete with online retailers in the 90s and early 2000s, they created more inspirational and impactful shopping experiences that helped shoppers identify with their products. Marketers noticed, and took the concept to the streets.

Read more

[Video] The Impact Map™: Creating Impactful Experiences Through Emotional Journeys
[Video] The Impact Map™: Creating Impactful Experiences Through Emotional Journeys

The Impact Map is the scientific foundation for the attendee Emotional Journey.

Read more

Design Shifts in the Experience Economy
Design Shifts in the Experience Economy

Brands and marketing departments are investing more in experiential and event-based programs as the key driver of their marketing mix. So much so that branded experiences are designed to be more integrated into our everyday lives. As millennials and other notable demographics shift spending priorities from material items to experiences, the experience economy is getting larger. This has forced designers to shift their thinking into three dimensions to include the customer experience.

Read more

Sound Design - The Art of Being Invisible
Sound Design - The Art of Being Invisible

For sound guys, the way we know we’ve done a great job is when no one notices we're even there. At events and experiences, everyone wants a seamless, rich audio experience with little disturbance and a clear sightline to all the action. My job is to make sure everyone can hear the sound, not see it.

Read more

On Twitter
On Facebook